Lanyard with energy absorbers

Ultra resistant

  • Standard EN 355
  • Lifespan 15 years

This single rope tether with energy absorber is attached to the safety harness at one end and to an anchor point at the other to protect the user in the event of a fall. The built-in energy absorber allows progressively retaining the user in the event of a fall. The two carabiners are built-in. The tether length cannot exceed 2.00 m.

See full description

  • Reference
  • Product extension length
  • Material
  • Standard
  • Use frequency
  • Weight
  • Barcod
  • Reference09100401
  • Product extension length1.75 m
  • MaterialPolyamide
  • StandardEN 355
  • Use frequencyUltra intensive
  • Weight1,2 kg
  • Barcod3178740209421
  • Reference09100402
  • Product extension length1 m
  • MaterialPolyamide
  • StandardEN 355
  • Use frequencyUltra intensive
  • Weight1,2 kg
  • Barcod3178740209438

To comply with the law and be sure to use equipment in perfect condition, all fall prevention PPE must be inspected every year and before use, always carry out a visual check. UNYC® personal protective equipment come with a 15-year guarantee from the date of manufacture.

  • Tethers made of semistatic polyamide rope, 11 mm diameter, stretching <5%, quality resistance to traction forces
  • Used when there is a fall hazard
  • The built-in absorber dissipates energy during a fall thereby limiting the impact force felt by the user
  • Buckle designed for hooking
  • Connectors for the 54 mm diameter anchor point with automatic closing, maximum load 22kN
  • Connectors for the 18 mm diameter harness with automatic closing, maximum load 22kN
  • Available in 1.00 m and 1.75 m
  • Maximum failure load: 2,200 kg
  • Use frequency : Ultra intensive

  • Product sheet

    PDF - 66 Ko

  • Internal certificate

    PDF - 52 Ko

  • Casque A complete range for industry and construction
  • MondeA brand available worldwide
  • SuiviA quality follow-up for the registration and verification of your equipment